Introduce the daily maintenance precautions of the heat shrinkable film vacuum packing machine (film wrapping machine):

1. It is best to heat shrink film packaging machine equipment with a magazine filter device, and the operator needs to need to regularly clean, technical personnel suggest cleaning once a month, to keep clean.

2. Add lubricating oil to all parts of the heat-shrinkable film pure water filling machine on a regular basis, especially the part installed at each connection activity of the heating rod.

3. To regularly check the pressure reduction, filtration, oil pollution triplets, to ensure that there is no water in the filter cup, there is a regular amount of lubricating oil.

4. In order to avoid affecting the sealing quality, the heating strip and the silicone strip should be kept clean.

5. The two layers of adhesive paste on the heating rod and under the heating sheet are insulated. In case of any damage, the adhesive paste should be replaced in time to avoid short-circuit.

6. for the thermal shrink film packaging machine working pressure, if there is no special situation, the technical staff suggested not to adjust casually, so as to avoid failure.

7, the thermal shrink film manual sealing machine equipment to pay special attention to the placement, can not appear inclined phenomenon, can not be placed in handling, so as not to cause unnecessary damage.

8. In order to ensure the safety of our staff, equipment and machines, in the installation of the time must be reliable grounding, reinstallation.

9, in case of emergency, the operator should immediately disconnect the power supply, to ensure the safety of personnel life this is common sense, but there are many people do not pay attention to.

10. When the equipment is started, it shall be powered on first; when it is stopped, it shall be powered off first and then cut off.
http://www.afripacker.com/category-liquid-paste-filling-machine-15018.html